www.crateamps.com
©2004 SLM Electronics
A Division of St. Louis Music Co.
1400 Ferguson Avenue
St. Louis, MO 63133
47-831-04 • 010604
CA125D Acoustic Amplifier
Output Power Rating:
125 watts RMS total system power
Woofer Amp:
2 x 50 watts RMS @1% THD
Tweeter Amp:
25 watts RMS @1% THD
Inst. Channel: Low:
+/-15dB @ 80Hz
Mid:
+/-15dB @ 400–1.2kHz (Contour)
High:
+/-15dB @ 10kHz
Input Impedance:
25k ohm (Active), 2.2M ohm (Piezo)
Input Sensitivity:
22mV RMS (Active), 9mV RMS (Piezo)
Sens. to Eff Send/Line out:
70mV
Max Input Signal:
6v RMS (17v peak to peak)
Feedback Elimination:
Freq: variable from 80Hz to 4kHz
Cut: variable from -0 to -30dB
Voc./Mic Ch: Input Impedance:
3k ohm (Lo-Z), 20k ohm (Hi-Z)
Input Sensitivity:
3mV RMS (Lo-Z), 15mV RMS (Hi-Z)
Sens. to Eff Send/Line out:
9mV (Lo-Z), 50mV (Hi-Z)
Max Input Signal:
10v RMS (28v peak to peak)
Aux. Ch: Input Impedance:
20k ohm
Input Sensitivity:
15mV RMS
Sens. to Eff Send/Line out:
50mV
Max Input Signal:
10v RMS (28v peak to peak)
Master EQ’s:
+/-12dB @ 80Hz, 330Hz, 1kHz, 4kHz, 10kHz
Effects Loop:
Line Out 1v RMS, Line In 1v RMS
Eff Return to Line Out Sens:
50mV
Eff Return In. Impedance:
11k ohm
Eff Send Out. Impedance:
2.2k ohm
Line Out Out. Impedance:
220 ohm (Lo-Z), 2.2k ohm (Hi-Z)
Internal Woofers:
2 x 8” w/polypropylene cones, rubber surrounds, 30oz magnet, 1” voice coil,
8 ohms, 50w RMS, 95dB 1w 1m
Internal Tweeter:
High efficiency Piezo, 110dB 1w 1m
Internal Crossover:
Active electronic type
Power Requirements:
120VAC, 60Hz, 160VA; 100/115VAC, 50/60Hz, 160VA; 230VAC, 50/60Hz, 160VA
Size and Weight:
16-3/4”H x 21”W x 10-1/2”D, 42 lbs.
Technical Specifications:
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
