Technical Specifications:
©1997 SLM ELECTRONICS • A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON AVENUE, ST. LOUIS, MO 63133
47-589-51 • 07/97
CRATE continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
Maximum Input Signal Level Accepted
17 volts peak to peak (-15dB switch pressed in)
Input Impedance
500k ohms (-15dB switch out), 75k ohms (-15dB switch in)
Signal to Noise Ratio
75dB typical
Output Power Rating
160 watts RMS @ < 5% THD w/8 ohm load, 120VAC line
220 watts RMS @ < 5% THD w/4 ohm load, 120VAC line
Gain @ 1kHz
67dB with EQ flat, Contour off
EQ Section
20dB range (±10dB) @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz,
4kHz, 8kHz and 16kHz
Input Power Requirements
120VAC, 60Hz, 250VA
100/120VAC, 50/60Hz, 250VA
230VAC, 50/60Hz, 250VA
Size and Weight
7-1/4”H x 21”W x 12-1/2”D, 35 lbs.
BXH-220 BASS AMPLIFIER