Technical Specifications:
Output Power Rating
50 watts RMS nominal @ 5% THD
Input Impedance
1M ohm
Ch. 1
Ch. 2
System Gain
66dB
95dB
Tone Controls
Low
16dB range @ 100Hz
Low
6dB range @ 100Hz
Mid
23dB range @ 300Hz
Mid
13dB range @ 700Hz
High
25dB range @ 10kHz
High
12dB range @ 10kHz
Presence Control
5dB boost @ 10kHz
Effects Send/Return Level
0.7V RMS nominal
Line Out Level
0.4V RMS nominal, unloaded
Tube Complement
12AX7 (3), 6L6 GT/5881 (2)
Power Requirements
115V 60Hz, 110VA; 2.5A Slo-Blo Fuse
Size and Weight
10”H x 20”W x 10-1/2”D, 34lbs.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The BV-50H is covered with high-quality, durable Tolex
®
. To keep it looking its best, avoid abrasive cleansers.
Wipe the cabinet clean using a slightly dampened soft cloth. Do not spray cleaners directly into the amplifier.
Never use brass cleaners on the hardware since they could damage their protective coatings.
®
©1996 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N 47-584-51 • 10/96
®
BV-50H Guitar Amplifier