manualshive.com logo in svg

Crane NRI G-13.mft Standard, Operating Instructions Manual

Share
Download
Crane NRI G-13.mft Standard Operating Instructions Manual Download Page 27

G-13.mft standard/Casino/SGI/BDTA/AMU

F

UNCTION

27

National Rejectors, Inc. GmbH, Buxtehude

High-voltage applications up to 42 V

If the coin validator is to be supplied with more than 10–16 V, at the factory
it can be equipped with a switching power supply which makes a supply
voltage of up to 42 V possible (not available for retrofitting).

Inverted common inhibit signal line (only standard and Casino model)

By default, the machine inhibits coin acceptance by transmitting an active-
high signal via the common inhibit signal line (pin 6, standby position of the
line is "Low").

The G-13.mft standard and Casino can be ordered with an inverted common
inhibit signal line (common inhibit, when active-low, standby position of the
line is "High") (see section "Interfaces (pin assignment and connection
diagrams)" in Chap. 9 "Technical data").

Summary of Contents for NRI G-13.mft Standard







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands