6
DIGITAL CONTROL PANEL INSTRUCTIONS
NOTE: Use on/off button to reset the humidifier.
ON/OFF
- Switch humidifier on/off by pressing this button.
TIMER
– The lower bar of numbers on the digital display are for the timer. You
can set the timer for 1- 12 hours or C for continuous run up to 24 hours. There
are 4 numbers on the digital screen (1,2,4,5). Press timer button to select
desired hours of operation. For example for 8 hours the digital display will be
08
and the lower bar will show numbers 1,2 and 5 = total 8. The digital number will
eventually disappear but the lower numbers will stay.
NOTE
: C indicates
continuous run. C will appear after pressing the timer button 12 times.
IONIZER
– Press this button to enrich mist with negative ions to freshen the
room air.
MIST OUTPUT CONTROL
- The first bars of numbers on the digital display are
for the mist output. Low - 1 (3 bars illuminate on either side), Med-2 (6 bars
illuminate on either side), High-3 (8 bars Illuminate on either side).
SET HUMIDITY LEVEL
– Press this button to set desired humidity level. You can
set the humidity level between 40% - 80%. The recommended humidity level is
between 40% - 60%. Press button 10 times for continuous output.
COOL/WARM MIST SELECTOR
- When humidifier is on, cool mist will
automatically start. To select warm mist, press button, when blue sun symbol
appears on the bottom right corner of display the warm mist will activate within
15 minutes.
AUTO SHUT OFF
–When the water level gets low, the humidifier will automatically shut
off. A red light in the lower right side of digital display will flash indicating the water
level is low and the humidifier mist has turned off.
Product Support: Contact Crane at 888-599-0992
Sales Inquiries: Contact Sylvane at 800-934-9194 or visit sylvane.com
