4
TECHNICAL SPECIFICATIONS
Maximum Power
1500 W
Heating Power Setting
750 W + 750 W
Voltage
120 VAC / 60Hz
OPERATION AND USE
Unpacking the Heater
WARNING:
Do NOT use this electric fireplace heater if any part has been under
water. Immediately contact Crane Customer Care or a qualified electrician to inspect or
replace the heater if necessary. Keep plastic wrapping away from children.
1.
Open the packaging carefully and remove the foam.
2.
Remove and discard the plastic bag.
Be responsible when handling the packing materials.
3.
Crane recommends keeping the original packaging for future transport and/or
storage of the fireplace heater.
Placing the Heater
1.
Place the heater on the floor in the desired location.
WARNING:
Keep combustible materials – such as furniture, pillows, bedding,
papers, clothes and curtains —at least 3 feet from the front of the heater. Also
keep them away from the sides and rear.
2.
Ensure that the heater’s control knob is switched to Power Off.
3.
Plug the heater into a 120VAC outlet. This
heater’s plug has a grounding pin. As a safety
feature to reduce the risk of electrical shock,
this plug is intended to fit in a wall outlet in one
way. If the plug does not fit fully in the outlet,
contact a qualified electrician. Do not attempt
to defeat this safety feature.
4.
Choose your desired heater setting (below) and enjoy your new fireplace heater.
