5
ASSEMBLY
WARNING:
Risk of Fire – Do not operate without legs attached to heater, or
heater mounted to wall.
Assembly for Floor Operation
Attaching Feet
1.
Before using the heater, attach the feet
(included separately) to the unit.
2.
Attach to the base of the heater using the 4
tapping screws provided, taking care to ensure
that they are located correctly in the bottom
ends of the heater.
Assembly for Wall Mount Operation
Wall Mounting Instructions
Note: Wall anchor and mounting screws are not provided. You will need 6 anchors and
6 mounting screws before beginning mounting.
1.
Using the mounting brackets as a guide, mark
the holes for the brackets on the right side.
2.
Move the wall mounting brackets, and drill the
first set of screw holes.
3.
Insert mounting anchors into the drilled holes.
4.
Insert a mounting screw into each of the top
2 anchors.
5.
Slide the mounting brackets onto the screws
through the mount support and anchor.
Tighten the screw lightly.
6.
Hold the heater level and use the other side of
the wall mounting brackets to mark the
second group of screw holes on the wall.
7.
Remove the mounting brackets from the wall and drill the second set of holes.
8.
Insert mounting anchors into the second set of drilled holes.
9.
Insert a mounting screw into each of the top 2 anchors.
10.
Slide the mounting brackets onto both sets of screws.
11.
Insert a mounting screw into each of the bottom brackets
12.
Firmly tighten all 6 screws to secure heater to the wall.
OPERATION AND USE
NOTE:
It is normal for the heater to emit some odor when it is turned on for the first
time or after having not been used for a long period of time. This will disappear when
the heater has been on a short while.
1.
Ensure that the power cord is rolled out.
2.
Choose a suitable location for the heater, taking into account the previously
stated safety instructions.
3.
Insert the plug of the heater into a suitable outlet.
tapping screws