Crane EE-5619, Instruction Manual

Page: 7 / 10

5
USE OF ESSENTIAL OIL
● Please follow the recommendations listed below for the proper use of essential oil to avoid
causing malfunction/damage to the product or cause harm to the user.
● Only Use essential oils.
● Put 3-5 drops of essential oil onto the aroma pad.
● Do not directly apply undiluted oil to your skin or swallow it.
● Do not allow the oil to come with your skin, wash it off with water. Should you swallow it,
seek medical help immediately.
● Some kinds of essential oil are not very soluble in water and tend to remain in the aroma
box. Therefore, clean the aroma box as directed.
● Ensure the oil does not get into your eyes. Should it happen, wash your eyes immediately
with water. Consult a doctor should irritation persist.
● If you feel unwell while using this product, turn off the device immediately.
● Pregnant women, elderly people, young children or people with chronic disease may be
more sensitive to the scent. If they feel unwell, stop using immediately.
● Store essential oil in a dark, cool place with cap tightly closed and out of reach of children
and pets.
OPERATION & USE
Charge Fan Fully Before First Use
1. Place the fan in the desired location. The fan should be placed on a flat surface to
ensure the fan will not be knocked over.
2.
Add your favorite aroma into the air by adding your favorite essential oil to the aroma box.
CAUTION: Ensure fan is turned OFF when adding or changing oils in the Aroma Box.
A. Grasp the notches on the aroma lid and open it counterclockwise.
B. Add 3 to 5 drops of essential oil on the aroma felt pad
C. Put the felt pad into the aroma box
D. Tighten the notches on the aroma lid clockwise
NOTE:
Avoid adding too many drops of oil.
3. Manual Adjust the fan to desired angle
(up and down) by holding the outer
case of the fan and tilting the inner
fan desired position of the fan.
ON/OFF/SPEED Button
To turn the unit power on, press the button on the back of the fan to turn on the power. The
unit starts operation at LOW speed.
1.
When the fan is on press the button to change the speed of the fan. This will cycle
from Low, Medium, High and OFF.