Crane EE-5618, Instruction Manual

Page: 7 / 10

5
OPERATION & USE
1.
Place the fan in the desired location. The fan should be placed on a flat surface to
ensure the fan will not be knocked over.
2.
Manual Adjust the fan to desired angle
(up and down for 0°-90°) by holding the column in
one hand and place the other hand on the bracket cover. Tilt bracket cover up or down
to get the desired position of the fan.
3. Choose your desired setting (below) and enjoy your new fan!
ON/OFF/SPEED Button
To turn the unit power on, press the button on the base of the fan to turn on the power. The
unit starts operation at Sleep Mode speed.
1. When the fan is on press the button to change the speed of the fan. This will cycle
from Light, Low, Medium, High and OFF.
2. Press and hold the button for 3 seconds to turn the fan off directly from any speed
setting.
LED Light Indicator
INDICATOR LIGHT FUNCTION
1 Solid Light Sleep Mode
2 Solid Lights Low Speed
3 Solid Lights Medium Speed
4 Solid Lights High Speed
1 Slow Flashing Light Low Battery Power
5 Quick flashes No Battery Power: Charge Fan
No Lights Fan Power is Off
CHARGING THE FAN
(Full charge will last up to 15 hours on Sleep Mode setting)
The fan can be charged while the fan is ON or OFF.
Charging when OFF: Plug the micro USB cord into the micro USB socket on the back of the
fan and plug the USB end of the cord into a USB port on a computer, or DC5V/1A adaptor
plugged into a wall outlet. One light will flash to indicate the fan is charging. The fan is at full
charge when the light remains solid. Full charging time is 7 hours.
Charging when ON: Plug the micro USB cord into the micro USB socket on the back of the
fan and plug the USB end of the cord into a USB port on the computer or DC5V/1A adaptor
plugged into a wall. The first indicator light will flash while the fan is charging while the solid
indicator will indicate the current fan speed setting. The fan is at full charge when the only
LED light indicator is the current fan speed.