www.cranecpe.com
ASSEMBLY INSTRUCTIONS
DEPA® Closed Surface Diaphragms
Series Nopped E4®
brands you trust.
Page 1: ...www cranecpe com ASSEMBLY INSTRUCTIONS DEPA Closed Surface Diaphragms Series Nopped E4 brands you trust ...
Page 2: ...with piston fixture The piston rod features a wrench attachment point Hold it in place with a wrench pic 4 and 5 Remove the assembly consisting of outer piston diaphragm and inner piston piston rod is exposed On the opposite side take out the assembly consisting of the diaphragm inner piston outer piston and piston rod from the center block w o picture Detach piston rod from the second diaphragm b...
Page 3: ...ame time lock the piston rod with a wrench Install pump chambers insert valve seats and balls check for any damages and if required replace mount suction and discharge manifolds as per the DEPA IOM Pic 11 Pic 12 Tighten by hand The DEPA nopped E4 starter kit contains 2 diaphragms 2 switch discs 2 set screws Sealings for air control area of pump Note The DEPA nopped E4 starter kit includes switch d...
Page 4: ...cts already on order provided that such alteration can be made without changes being necessary to specifications already agreed All trademarks in this material are property of the Crane Co or its subsidiaries The Crane and Crane brands logotypes in alphabetical order ALOYCO CENTER LINE COMPAC NOZ CRANE DEPA DUO CHEK ELRO FLOWSEAL JENKINS KROMBACH NOZ CHEK PACIFICVALVES RESISTOFLEX REVO SAUNDERS ST...
