BevMax_Media_Programming_10_6_10 Page 52 of 106
08/15/2013
Use the numeric Keys to choose an option. The
chosen option will be checked. Use the center of the
X
button to accept the option selected and return to
Language screen.
Note: In the current version only one language
present (US English).
4. DTS (data transfer system) – Press the 4 Key to bring up a screen.
Press the 4 Key will bring up a screen listing the functions in this group.
Use the numeric Keys to choose a
function.
Choosing a function will bring up the
first screen for that function, or toggle
settings.
1. Press the 1 Key will bring up
a screen allowing you to choose the
way the Data is transferred.
Use the numeric Keys to choose a function. The selected option
will be checked.
Once the option is selected, use the center of the OK Key to
accept the changes.
*Domestically the setting will typically be set for DEX.
2.
Press the 2 Key will bring up a screen divided into two sections.
Use the numeric Keys to select an action. Selecting an action will cause all the items in the audit list to
change status to active or in-active depending on the numeric Key used.
Use the numeric Keys to change the status of individual lines.
Checked lines are active
This gives you the ability to shorten the DEX file. Do not
remove items without checking with your DEX provider or
manufacturer representative.
The list uses more than one screen. Use the top and bottom
sections of the OK Key to scroll thru the entire list.
Audit list that is available is as follows:
ID 1, ID 4, ID 5. VA 1, VA 2, VA 3. BA 1. CA 1, CA 2, CA 3,
CA 4, CA 7, CA 8, CA 9, CA 10, CA 15, CA 17, CA 22. CB 1. DA 1, DA 2, DA 3, DA 4, DA 5, DA
6, DA 10. TA 1, TA 2. PA 1, PA 2, PA 3, PA 4, PA 5, PA 7, PA 8. EA 1, EA 2, EA 3, EA 4, EA 5, E
6. MA 5. LA 1.
Enabled Languages
1) English-UK
2) English-US
√
3) Nederlands
DTS
1) DTS Standby mode DEX
2) DTS Audit List >
3) CA304 / CA308 Data Type Numeric
4) Data Reset after Transfer
Reset
No
5) Event Data Reset after Transfer
Reset
No
6) Passcode Reset >
7) DTS Cache Settings >
DTS
1) DTS Standby mode DEX
1) DDCMP
2) DEX
√
DTS Audit List
1) Set All >
2) Clear All >
DTS Audit List
3) ID 1
√
4) ID 4
√
5) ID 5
√
6) VA 1
√
7) VA 2
√
8) BA 1
√