M140.x
Page
3
of
3
October 28, 2015
SERVICE INFORMATION
4. Connect the electrode wire from the port sensor, 80492958, to the bottom of the port with a #8
nut. Do not over tighten. See Figure 5
Figure 5
5. Attach the port sensor harness to the port harness at the top of the port assembly.
6. Attached the port motor harness to the port motor board at the top of the port assembly.
7. Install the motor cover, be sure to route the harness thru the motor cover and secure into place.
8. Test vender for proper operation
