6
SECTION: E WARRANTY REPAIR
E-1) Information Needed:
ALWAYS furnish the following information:
1. Pump Part Number
2. Pump model number
3. Pump date code
E-2 Part Number:
The part number consists of a six (6) digit number, which
appears in the catalog. A one or two letter suffix may
follow this number to designate the design configuration.
This number is used for ordering and obtaining informa-
tion.
E-2 Model Number:
This designation consists of numbers and letters which
represents the horsepower, motor phase and voltage, and
pump design. This number is used for ordering and obtain-
ing information.
E-3 Date Code:
The Date Code consists of two numbers which are
punched holes in the nameplate. This specifies the month
and year which indicates the date the unit was built.
Pumps Sold as Complete Units Only.
60 Hz
Testing is performed with water,
specific gravity of 1.0 @ 68° F, other
fluids may vary performance
