Crane Barnes DS Series, Installation And Operation Manual

Page: 5 / 25

5
SECTION: A - PUMP SPECIFICATIONS - DOUBLE SEAL
inches
(mm)
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION II HAZARDOUS LOCATIONS.
3.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN
ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT
INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED
MEDIA IS A COMMON OCCURRENCE.
DISCHARGE .................. 2” NPT, Vertical
LIQUID TEMPERATURE 104°F (40°C) Intermittent
MOTOR HOUSING ........ Cast Iron ASTM A-48, Class 30
VOLUTE ......................... Cast Iron ASTM A-48, Class 30
SEAL PLATE ................. Cast Iron ASTM A-48, Class 30
IMPELLER
Design
........... 3 Vane, Open with Pump out vanes
on Back side. Dynamically
balanced, ISO G6.3
Material ........ Polypropylene with threaded 300
Series Stainless Insert
SHAFT ............................ 416 Stainless Steel
SQUARE RINGS ............ Buna-N
HARDWARE .................. 300 Series Stainless Steel
PAINT ............................. Air dry enamel, top coat
SEAL
Design
.......... Tandem Mechanical with Oil-Filled
Reservoir
Material
........ Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ................ 20 Ft. (6.1 m) Cord, Plug on 1 Phase
Quick connect. Custom molded for
sealing and strain relief
SPEED ........................... 3450 RPM, 60Hz (nominal)
UPPER BEARING:
Design
.......... Single Row, Ball, Oil Lubricated
Load ............. Radial
LOWER BEARING:
Design
.......... Single Row, Ball, Oil Lubricated
Load
............. Radial & Thrust
MOTOR:
Design
.......... NEMA L, Single phase,
NEMA B, Three Phase Torque Curve,
Oil Filled, Squirrel Cage Induction
Insulation
...... Class B
SINGLE PHASE ............. Permanent Split Capacitor (PSC)
Includes overload protection in motor
THREE PHASE .............. 200-240/480 is Tri voltage motor.
600V. Requires overload protection
to be included in control panel
OPTIONAL EQUIPMENT:
Seal Material, Impeller Trims, Additional Cord,
N/C Temperature Sensors with cord for 3 Phase pumps
(Requires relay in Control Panel). N/O Moisture Sensor for
DS Pumps (Requires relay in Control Panel).