If the internet connection on your smartphone or tablet is active, the Crane
Connect app will automatically upload all data measured to the website
www.cranesportsconnect.com for permanent storage.
ASSEMBLY
Assembling the speed & cadence sensor
1.
Attach the speed & cadence sensor
1
and the sensor cover
2
in the middle of
the chainstay with 4 cable ties
3
(2 cable ties for each sensor part) (see
fig. A
+
fig. B
).
2.
Guide the cable ties through the openings
9
in the speed & cadence sensor.
Close the cable ties, but do not tighten them firmly yet.
Assembling the speed magnet and cadence magnet
Please note that the white adhesive label on the cadence magnet serves
as a protective foil and therefore should not be removed.
3. Position the speed magnet
5
on one of the spokes so that the speed magnet is
level with the speed & cadence sensor
1
. Attach the magnet holder
6
to one
of the back wheel spokes (see
fig. A
+
fig. B
).
4.
Fix the speed magnet to the magnet holder.
5.
Position the cadence magnet
4
on the pedal arm so that the cadence magnet is
level with the speed & cadence sensor.
6.
Guide the cable tie
3
through the opening
11
in the cadence magnet. Close the
cable tie, but do not tighten it firmly yet.
Adjust the position of the speed and cadence magnets so that the magnets
pass the speed & cadence sensor at a distance of approx. 2 mm from the
corresponding arrow mark
10
on the speed & cadence sensor.
7.
Firmly tighten the cable ties of the speed & cadence sensor and the cadence
magnet.
CARE AND MAINTENANCE
Cleaning the speed & cadence sensor
NOTICE
Risk of damage!
Improper cleaning may damage the speed & cadence sensor.
• Do not immerse the speed & cadence sensor
1
in water or other liquids.
• Do not use any aggressive cleaners, sharp or metallic cleaning utensils such as
knives, hard scrapers or similar items. They could damage the surfaces.
•
Clean the speed & cadence sensor with a soft, damp, lint-free cloth or a soft brush.
Storing the speed & cadence sensor
NOTICE
Risk of damage!
Improper handling of the speed & cadence sensor may result in damage.
•
Store the speed & cadence sensor in a suitable location between -10 °C and +60
°C and in a clean dry area.
• Keep the speed & cadence sensor away from direct sunlight.
TECHNICAL DATA
Model no.:
AE8-SPCD-2
Article no.:
96044
Storage temperature:
-10 °C to +60°C
Ambient temperature:
0 °C to +50 °C
IP-Code:
IPX7
Power supply:
3V lithium cell battery
Type CR2032
(1 x 3 V DC CR2032)
CHANGING THE BATTERY
When activating the speed & cadence sensor
1
after 5 minutes every
second a green light or a red light will flash.
• Green light: The voltage is equal or higher than 2.82 V
•
Red light: The voltage is below 2.82 V => Battery has to be changed
1.
Open the battery compartment
8
of the speed and cadence sensor
1
by
turning the battery compartment cover anti-clockwise with a coin.
2.
Remove the empty battery
7
using a pinted object.
3. Insert a new battery so that the positive pole (+) is facing upward (see
fig. D
).
4.
Replace the battery compartment cover.
5.
Close the battery compartment by turning the battery cover clockwise with a coin.
DISPOSAL
Disposing of the packaging
CARTON Widely Recycled
BLISTER Widely Recycled
Dispose of the packaging separated into single type
materials. Dispose of paperboard and cardboard with waste
paper and films with recyclable waste.
Disposing of the speed & cadence sensor
(Applicable in the European Union and other European countries with established
systems for separated collection of recyclables.)
Waste equipment must not be disposed of together with domestic waste!
This symbol indicates that disposing of this product together with domestic
waste is prohibited under the directive on waste electrical and electronic
equipment (2012/19/EU) and national laws. This product must be left with a
collection point specifically designated for this purpose. This can be carried
out by returning the product on purchasing a similar product or leaving the product
with an authorised collection point for recycling of waste electrical and electronic
equipment. Due to potentially hazardous materials which are often contained in waste
electrical and electronic equipment, incorrect handling of waste equipment may have
adverse effects on the environment and human health. By disposing of this product
correctly you also contribute to an effective usage of natural resources. Information
on waste equipment collection points can be obtained at your local authorities, public
bodies responsible for waste management, an authorised body responsible for the
disposal of waste electrical and electronic equipment or your waste collection service.
Batteries must not be disposed of together with domestic waste!
As a consumer you are required by law to leave any batteries, regardless of
whether they contain hazardous material* or not, with a collection point in
your community / your borough or return them to your retailer to be disposed
of in an environmentally friendly manner.
*marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead
DECLARATION OF CONFORMITY
RoHS-Directive 2011/65/EU, RED Directive 2014/53/EU
Krippl-Watches hereby declares that the speed & cadence sensor is in
compliance with the essential requirements and other relevant provisions
of the directives 2011/65/EU and 2014/53/EU.
You can access the full declaration of conformity on our website: www.krippl-watches.
com (under “Customer Service”)
CUSTOMER SERVICE
CUSTOMER
Service
Toll-free service hotline
00800 52323000
(No country code
necessary)
www.cranesportsconnect.com
