Crane Song avocel, Operator'S Manual

Page: 5 / 16

If one presses the input select button a second time it will enable the gain trim mode.
This will allow changing the input level on the selected input relative to all other inputs.
Gain trim has a plus or minus 10 db range. By pressing the input button a third time, the
gain will return to normal operation while remembering the gain trim.
In normal operation all input gains will track. At the end of the stepped attunator range
the offset gains could reach a limit where they will not change. As an example if you
trim an input up by 10 db and then move the main gain to max that input will be max
+10 which is not possible. Bringing the main gain back down the 10db be offset will still
exsit. The same thing will happen on the bottom end of the control range
In normal operation one should set the power amp gain, so that your normal listening
level is with the gain knob at 1 o’clock. There is a supplied adjustable pad for powered
monitors and power amps that have no gain control.
Input Gain Trim