Crane Merchandising Systems Merchant 180, Operator'S Manual

Page: 88 / 170

Program: Product Config. Merchant™ Operators’ Guide
January 2008 80 1810006
Selection Configuration
1. Press until you reach the Main
Menu , then use or to select
Product Configuration and press .
2. In the Product Configuration menu,
use or to select Selection
Configuration and press .
3. In the Selection Configuration menu,
use or to select the
product(s) you wish to set Auto
Configuration (on or off) for.
4. Press to remove or add the “ X ”(s)
from the box(es) preceding the product
number(s).
NOTE:
By pressing , you are able
to quickly remove or add the “ X ”(s)
from all listed products for the group.
5. Press once to return to the
Product Configuration menu, or twice to
return to the Main Menu .
+
_
+
_
+
_
Main Menu
Data Recall
5
Diagnostic
Test
Price
Product Configuration
6
Press EDIT to Select
Product Configuration
Configuration Version
5
Selection Configuration
FIFO Setup
Couple Motors
6
Press EDIT to Select
Selection Configuration
X
Product 101
5
X Product 102
Product 103
X Product 104
Product 105
6
* = Auto Configure