Crane Merchandising Systems Merchant 180, Operator'S Manual

Page: 162 / 170

Program: System Settings Merchant™ Operators’ Guide
January 2008 154 1810006
Edit the Supervisor PIN
The Supervisor PIN code on the Merchant™
can be changed.
First follow the procedure in “Enter Security
Code” on page 153 to unlock the
Edit Pin menu.
1. Once the old Supervisor PIN is entered,
access the Security Codes menu by
pressing until you reach the Main
Menu , then use or to select
Security Codes and press .
2. In the Security Codes menu, use
or to select Edit Pin and press
.
NOTE
If Edit Pin does not display in the
Security Codes menu, follow the procedure
in “Enter Security Code” on page 153 to
unlock the Edit Pin menu.
3. In the Edit Pin screen, enter a new pin
number and press . The code
should be four digits. Be careful when
entering the PIN code – if you enter more
than four numbers, the display will scroll back
to the first digit.
4. Write the new Supervisor PIN code number
down and keep it in a secure place.
5. Press to lock in the setting and return
to the Security Codes menu.
6. Press once to return to the
Main Menu .
+
_
+
_
Main Menu
Product Configuration
5
Special Vend Modes
Free Vend
System Settings
Security Codes
6
Press EDIT to Select
Security Codes
Lock Menu Items
5
Enter PIN
Edit Supervisor PIN
6
Edit PIN
Edit Pin
1234
0-9 to Edit Value
EDIT when Finished