Crane Electronics Ltd
The force in torque management
WrenchStar Multi - Pairing Guide
Getting started with your digital torque wrench.
TCI Home Page
On the TCI/TCI Multi web page on your browser, click
on the ‘Wrench Status’ tab on the main navigation
menu at the top.
Please note. For more information about the initial setup of the TCI/
TCI Multi on your PC, please refer to the TCI Quick Start Guide.
1
Select Wrench Number
Under the ‘Get results from transducer’ and ‘Pair
TCI with transducer’ drop down menus, ensure the
number selected relates to the number of the wrench
that you are pairing to the TCI Multi. e.g. if this is the
first wrench to be paired, select number 1, if it is the
second wrench to be paired, select number 2 etc.
2
Pair Mode
Ensure the WrenchStar Multi is in ‘pair’ mode by
pressing and holding down the blue ‘pairing’ button on
the wrench until the LED light turns purple.
3
Reset Button
WrenchStar Multi
TCI
On/Off and
Pairing Button
WrenchStar Multi
Torque Limit
LED Display
Screen
Status LEDs
Pairing with a TCI or TCI Multi Line-side Controller
Pair TCI
Underneath the ‘Pair TCI with transducer’ drop down
menu, click ‘Pair’ and the wrench should connect,
which is confirmed by the LED light turning blue on the
wrench and also on the corresponding wrench number
on the front of the TCI/TCI Multi.
4
LED Light
360
o
Status
Light Ring
