16
Crane
Electronics Ltd
The force in torque management
Crane Electronics Ltd
Watling Drive
Sketchley Meadows
Hinckley LE10 3EY
Tel: +44(0) 1455 25 14 88
www.crane-electronics.com
Readings are taken in order, so the first is 1 the
last reading would be 999. One press of the
delete icon will allow you to delete the
last
reading only. Press the green OK button to do
so.
A second press of the delete button will allow
you to delete all readings in the list in one go.
Just press the green OK button.
The other time you are forced to delete all
readings is when you change the measurement
mode mid-way through readings you have
already done.
TQ = Torque
ANG = Angle
CLK = Click
PUL = Pulse
UL = Upper Spec Limit
NOM = Target
LL = Lower Spec Limit
THR = Threshold
Pressing the fixed Settings key. The first screen you will come to is the torque and angle settings.
It will show (ang)le for Peak, CLK THR (Click Threshold) for Click and Pulse for Pulse.
Using the up and down arrows on the keypad you can manoeuvre between the required lines. When the arrow
is on the line press the green button. You can then use the Up and Down arrows to change the numbers and
the left and right arrows to move left and right. Pressing the green button will save and take you back to the
main setting screen. Note. Pressing Settings icon cancels edit.
DELETION
SETTINGS
