Tourno pick-up
Original Operation Manual English
- 16 -
Installation prior to first commissioning (for authorized Cramer dealer)
Installation of driver's seat and steering wheel
Delivery, packaging, assembly
ATTENTION!
Squeezing hazard during
installation!
Parts of the body may be squeezed when
components are mounted.
Risk of high dead weight
•
The machine must not be lifted manually.
•
Pull machine from pallet.
•
Remove machine parts separately from packaging.
Transport inspection
•
Check the machine for completeness and potential damage upon delivery.
•
The machine shall be supplied to the specialist dealer in a partially assembled
condition.
•
Assembly and start-up have to be performed by a specialist dealer and/or an expert
in this field.
Packaging
•
Please dispose of packaging materials separately.
Overview
Fix steering wheel
1.
Place the feather key into the groove on the
steering axle and hold it. Place the steering
wheel on the steering axle.
2.
Place the washer on the opening in the centre
of the steering wheel.
3.
Fix it by the hexagon bolt through the steering
wheel opening.
4.
Position cap and press it on.
1.
Feather key
2.
Washer
3.
Hexagon bolt
4.
Cap
Fix driver's seat
1.
Place driver's seat on seat base. The
openings under the seat and the base
must be flush. (Please also refer to no.
3.3, Driver's seat adjustment)
2.
Place the washers on the hexagon bolts
and screw them into the openings under
the seat; tighten them.
1.
Driver's seat
2.
Washer
3.
Hexagon bolt
