18
User Preventive Maintenance
We recommend the user of
CRAM-A-LOT
®
compactors adopt a program of regularly scheduled maintenance procedures. This
schedule should be followed to insure against premature failure of mechanical or hydraulic components.
1. INITIAL
CHECK:
a. All nuts and bolts during the first week of use, and then monthly thereafter.
b. Hydraulic reservoir should be at the mid to upper range of the sight glass with ram retracted. Use a good quality
5W-20 Hydraulic fluid.
c.
Hydraulic lines for leaks.
d. Hydraulic hose condition. (Check for damage, kinks, etc.).
e. Access covers to be sure fasteners are in place.
f.
Power unit. Remove dust and dirt from outside of control box. Wipe off any dirt or grease, oil or moisture.
2. MONTHLY
CHECK:
a. Check external hoses for chafing, rubbing, or other deterioration and damage.
b. Check for any obvious unsafe conditions, such as electrical lines or operator obstructions, in compactor area. If
any unsafe conditions are found, they should reported immediately to an authorized maintenance technician.
c.
Check oil level in hydraulic reservoir.
d. Check functional operation of standard controls and options (stop button, timers, lights, etc.).
USER PREVENTIVE MAINTENANCE
Summary of Contents for SCR-02
