BASIC OPERATION
Disc Playback:
~ Lift up the panel and turn to desired angle. Slide the POWER ON/OFF switch to "ON" position to power on the unit,
the Green indicator on front of the unit will light.
~ Press the
OPEN area on the disc door to open it. Place the disc on the center spindle with label side facing up. Close the
disc door then the player will start playback automatically.
~ To power off, press the POWER button on the remote control to turn the unit to standby mode. The Green indicator will
remain lighting. Press the POWER button again to turn the unit on from standby mode. Or, slide the POWER ON/OFF
switch to OFF position to power off the unit. (For saving energy, always power off the player by slide the POWER ON/OFF
switch on the player to OFF position .)
PROG (Program)
During DVD playback, press the PROG (Program) button. The setting menu will appear on the screen as Fig. A.
~ Using the Numeric and Direction buttons to enter the desired Chapter and Title number. Fig.B will appear on
the screen.
~ Using the Direction buttons to select and highlight the "Start" button then press the ENTER button to start program
playback.
~ During playback, press the button twice to cancel the program playback.
Fig.A Fig.B
During CD disc playback, press the PROG button, the setting menu will appear on the screen as Fig. C:
Fig.C Fig.D
~
Using the Numeric and Direction buttons to enter the desired Track number, Fig. D will appear on the screen.
~
Using the Direction buttons to select and highlight the "Start" button, then press the ENTER button to start program
playback.
~
During playback, press the button twice to cancel the program playback.
Exit
Exit
Start
NEXT
NEXT
Exit
Exit
Start
NEXT
NEXT
Summary of Contents for CTFT750
