TROUBLE SHOOTING:
SYMPTOM:
POSSIBLE CAUSE
POSSIBLE SOLUTION
Remote Control not
functioning
The batteries drained.
Replace by new batteries.
Batteries wrong installed.
Reinstall the batteries as the polarity marking inside
the battery compartment.
The unit not workable
The built-in battery had
not connected to the unit
Connect the built-in battery to the unit as
“OPERATION” section point 1 on page 7.
The built-in battery drained.
Recharge the built-in battery as the
“PREPARATION” section on page 4.
The unit had not paired to the
Remote Control.
Pair the unit to the Remote Control
as “OPERATION” section point 3-5 on page 7.
The blade still running
after landing
The unit had not shut off.
Push the Left Joystick on the Remote Control to
downward. Wait until the blades is stop turning.
Press the Power ON-OFF Button on the Remote
Control to shut off the it. Slide the Power ON-OFF
Button the bottom of unit to Off position to shut off
the unit.
Control abnormal
or motion unstable
One (or more than one) blade(s)
deformed or damaged.
Check and replace the deformed/damaged blade(s)
by new one.
The unit can not
moving straightly
or auto turning
Adjust the motion by press the:
<
Left/Right fly and/or Forward/Backward
and/or Light/Right turn Trimmers repeatedly.
Not operation in Wi-Fi
Mode
Wi-Fi had not connected
Connect to the Wi-Fi as page 9-10.
12
Summary of Contents for CRT721CW
Page 1: ...CRT721CW ...
Page 15: ......
