Craig CMA3584, Owner'S Manual, Page: 5 / 8

pairing as the on screen instructions on the external BT Device. After
paired, the Blue Indicator will stop blinking. (For details pairing procedures,
please refer to the user’s manual of your BT Device).
Notes:
z
“
z
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
4. During playback:
z
z
Press the (Play/Pause) Button to pause; press again to resume.
z
Press and release the
the unit.
When the external BT Device searched the unit, our model number
When finished listening, slide the Power ON/OFF Switch to OFF position to
shut off
CMA3584 CMA3584
” will appear on the display of external BT Device.
Press and hold the / or / Buttons to adjust volume level.
5.
5
In the first time use or re-pairing the unit to a new BT Device, pairing as below:
BT (BLUETOOTH) PAIRING:
1. Connect the Right Speaker to Main Speaker as the previous procedures.
2. Slide the Power ON/OFF Switch on the rear of Main Speaker to ON position,
the Blue Indicator will illuminate and blink.
3. Power on the external BT Device and enter to searching mode. Start
Pairing code "0000" or "1234" may need to enter.
2. Slide the Power ON/OFF Switch on the rear of Main Speaker to ON position
to power on the unit, the Blue Indicator will illuminate and blink. Wait a few
seconds until BT auto paired. (The Blue Indicator stop blinking).
Buttons repeatedly to skip tracks. /
/
or
OPERATION
BT (BLUETOOTH) PAIRING:
IMPORTANT:
3. Play the music in the paired BT Device as usual.
Or, adjust the volume level of the paired BT Device as usual.
Make sure the Audio Connection Cable has not been inserted into the
AUX (IN) Jack on the Main Speaker. Otherwise, BT will not function.
Or, press the or Buttons on the paired BT Device repeatedly to
skip tracks.