Craig CMA3559, Owner'S Manual

Page: 5 / 8

4
OPERATION
In first time use or re-pairing to new BT Device, pairing the unit to
external BT Device as below:
1. Slide the Power ON/OFF Switch on the rear of unit to ON position. Blue
Indicators on the front panel will light and blinking.
Important: Make sure the Audio connection cable haven’t inserted to
the AUX IN Jack on the rear of unit. Otherwise, the unit will turn to
AUX IN mode. BT will not functioning.
2. Power on the external BT Device and enter to searching mode. Start
pairing as the on screen instructions on the external BT Device. After
paired, the Blue Indicator will stop blinking. (For details pairing procedures,
please refer to the user’s manual of your BT Device).
Notes:
z
“ CMA 3559 ” will appear on the display of external BT Device.
z
Pairing code “0000” may need to enter.
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Slide the Power ON/OFF Switch to ON position to power on the unit. The
Blue Indicator on the front panel will light, wait until the Blue Indicators is
stop blinking. (It needs take a few seconds).
3. Plays the music in the connected BT Device as usual.
4. During playback:
z
Press the + or – (Volume Up or Down) Buttons to adjust volume level
as desire.
z
Press the (Play/Pause) Button to pause; press again to resume.
z
Press and release the or Button to skip tracks.
5. If the unit was paired to a Cell Phone:
z
When a call is incoming during listening, press the
When finished, press the
playback.
z
Press and hold the Button for last number redialing.
the unit.
When the external BT Device searched the unit, our model number
Button to hook
off then speak to the built-in microphone on the top of front panel to
answer the phone.
Button to hook on then
resume to music
6. When finished listening, slide the Power ON/OFF Switch to OFF position to
shut off