background image

NOTES:

To the DC IN jack on the rear of the unit.

1. Placing on the table

2. Mounting the Speaker Bar onto a wall

Distance Between Two Brackets

1. Insert the small plug from the supplied AC/DC Adapter to the DC IN Jack on the rear of unit.
2. Connect the AC/DC Adapter to the wall outlet having AC 100-240V~;  50/60Hz.

To the wall outlet

2-3 inches

This AC/DC Adaptor intended to be correctly orientated in a vertical or floor mount position.

To save energy, unplug the AC/DC Adaptor from the wall outlet if you may not use the unit 

for an extended period of time.    

4

POWER SOURCE

INSTALLATION

DC IN

DC      5.8V,1.5A

The Red

 Standby Indicator on the front of unit will illuminate.

When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed
space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the
Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar
could produce a potential heat hazard.

19.3 inches

We recommend having this unit professionally mounted. By using wall mounting accessories
(not included), the unit can be mounted onto a wall.

OPTICAL IN

AU

N

AU

N

L

R

DC IN

DC      5.8V,1.5A

2

 I

1

 I

Summary of Contents for CHT985

















Reviews: