Power on the external BT Device and enter to BT searching mode. Start
pairing following the on screen instructions from the external BT Device.
Note:
When the external BT Device searches for the unit, the BT Device name
“CBH568” will appear on the BT Device Name List on your external BT
Device. Pair your BT Device with it.
3.
When paired:
You will hear an audible prompt from Earbud to say “Connected”.
On the Earbud, the Red Indicators will turn off. The Blue Indicator will start
blinking slowly.
4.
If pairing is complete you may now play music and answer calls with your
external BT Device.
5.
During Playback:
Using the controls on the paired BT Device to adjust sound level; skip
tracks…as usual.
Or, press and hold the Control Button on the Earbud approximately 1 second
to skip tracks.
Press the Control Button on the Earbud to pause, press again to resume
normal playback.
6.
If the Earbud is paired to a Cell Phone and a call is incoming during an active
music session:
Press the Control Button on the Earbud then speak to the Microphone to
answer the call. When your call is complete, press the button again to
disconnect or end the phone call and resume to music playback.
Or, press and hold the Control Button on the Earbud approximately 1 second
to decline the incoming call then resume to music playback.
Quick press the button twice to redial the last telephone number your cell
phone called.
7.
When finished listening, press and hold the Control Button on the Earbud until
you hear an audible prompt from Earbud to say “Power off” to shut off the
Earbud.
To use the Right Earbud alone:
For first time pair the Right Earbud to the BT Device ( or repair to a new BT Device)
alone, follow the steps below:
1.
Recharge the Earbud as previously instructed.
5
