16
8: Test Cables
The part numbers below can be used to build your own test cable for use
with the TPG. The recommended length is 6’, with a pair of connectors on
each end (4pin + 2pin).
The connector pinout is as follows, from left to right:
4pin: R,G,B, Ground
2pin: H,V
Using a separate 2pin connector for sync allows you to easily change sync
between -H/-V, and +H/+V.
Molex part numbers:
09-50-8021 Housing, 2 pin .156” x 2
09-50-8041 Housing, 4 pin .156” x 2
08-50-0134 Crimp terminal .156”
Online Resellers:
greatplainselectronics.com/products.asp?cat=86
digikey.com
mouser.com
