1. Install the filament guide tube holder/FMS *
Use a hex wrench to install the guide tube holder/
FMS* onto the top of the Craftbot Plus Pro. Keep in
mind that the spool holder must be installed directly
next to it. (Connect the FMS to the machine*)
2. Install the filament guide tube
One end goes into the guide tube holder/FMS.
Push the other end into the hole on the top of the
extruder.
3. Install the filament spool holder
Use a hex wrench to install it somewhere close to
the filament guide tube holder. (Keep in mind leave
some space for FMS* connector.)
4. Mount the filament spool
Now get the spool from the box containing the PLA
filament. Fit the spool onto its holder so that the lead
end keeps its course when the filament is fed into
the guide tube holder.
5. Attach the power cord
Ensure that the power switch on the back of the
Craftbot Plus Pro is set to the OFF position. Insert
the AC power cord into the power input (on the
back) and switch ON your 3D printer!power input on
the back of the Craftbot. Switch ON your 3D Printer.
www.craftbot.com
QUICK START GUIDE
WARNING!
For safety reasons please read the User Manual before using Craftbot for the first time.
You can find it on the enclosed pendrive or you can download it from www.craftbot.com.
Videos worth watching:
