manualshive.com logo in svg

CraftUnique CraftBot 3, User Manual, Page: 40 / 41

Share
Download
CraftUnique CraftBot 3 User Manual Download Page 40

40

CraftBot 3

123.  - M4005:  Set maximum bed heat temp:  H S
124.  - M5000:  Set XY Z jog feed:  X Z
125.  - M5001:  Set mechanical parameters:  E X Z
126.  - M5002:  Set XY offset:  X Y
127.  - M5003:  Set TMC2130 current:  E X Y Z
128.  - M5004:  Get TMC2130 status regiter.
129.  - M5005:  XY calibration moode:  S
130.  - M6666:  Reset:  S
131.  - M6969:  Erase flash:  S
132.  - M7001:  Set WIFI SSID/Pass.
133.  - M7002:  Wifi List AP First.
134.  - M7003:  HMI send WIFI AP list.
135.  - M7004:  WiFi Report:  Q S T
136.  - M7005:  Set e-mail address.
137.  - M7006:  Get AT version number.
138.  - M7007:  Rec WiFi AT version.
139.  - M7008:  Overwrite Wi-Fi SSID.
140.  - M7009:  wifi reset pin check:  S
141.  - M8001:  Read motor:  Q S
142.  - M8010:  Read errors.
143.  - M8020:  Set thermal motor warning:  S
144.  - M9001:  Set LED to function.
145.  - M9003:  ReadMotorDIAG.
146.  - M9005:  Enable/disable cover:  S
147.  - M9006:  Set print mode:  Q S X
148.  - M9007:  Switch off calculation.
149.  - M9008:  Set nozzle diameter:  D T
150.  - M9090:  Set parser limits:  S X Y Z
151.  - M9999:  Set MicroStep:  E X Y Z
152.  - M765:  calc offset.
153.  - M766:  Meas x y distance:  D T
154.  - T0:  Select tool 1:  F S X Y Z
155.  - T1:  Select tool 2:  F S X Y Z

13.2. USEFUL LINKS 

User Manuals: https://support.craftunique.com/258569-User-manuals
Firmware: https://craftbot.com/firmware
Youtube official channel: https://www.youtube.com/channel/UC04qcXksuyJ2GASsGscNqpA/featured

Summary of Contents for CraftBot 3










































Reviews:

No comments