background image

All information, illustrations and specifications in this manual are based
on the latest product information available at the time of printing.
We reserve the right to make changes at any time without notice.

TABLE OF CONTENTS

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Know Your Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Oil and Fuel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Starting and Stopping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Repair Protection Agreements  . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Service Numbers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

SAFETY

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the states of
California, Maine, Oregon and Washington.

All U.S. Forest Land

and the state of California (Public Resources Codes 4442 and
4443), Oregon and Washington require, by law that certain internal
combustion engines operated on forest brush and/or grass-covered
areas be equipped with a spark arrestor, maintained in effective
working order, or the engine be constructed, equipped and
maintained for the prevention of fire. Check with your state or local
authorities for regulations pertaining to these requirements. Failure
to follow these requirements could subject you to liability or a fine.

This unit is factory equipped with a spark arrestor.

If it requires

replacement, contact a Sears Parts & Repair Service Center to
install the appropriate muffler assembly.

Read the operator’s manual and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the
operator and/or bystanders.

SYMBOL

MEANING

WARNING:

Signals a SERIOUS hazard.

Failure to obey a safety 

WARNING

signal 

CAN

result in

serious injury to yourself or to others.

CAUTION:

Signals a MODERATE hazard. 

Failure to obey a safety 

CAUTION

signal 

MAY

result in

property damage or injury to yourself or to others.

The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instructions or warnings they give are not substitutes for proper
accident prevention measures.

NOTE:

Advises you of information or instructions vital to the

operation or maintenance of the equipment.

DANGER:

Signals an EXTREME hazard.

Failure to obey a safety 

DANGER

signal 

WILL

result in

serious injury or death to yourself or to others.

CALIFORNIA PROPOSITION 65

WARNING:

Engine exhaust, some of its

constituents and certain finished components contain or emit
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash hands
after handling.

2

© Sears Brands, LLC

Summary of Contents for Weedwacker 316.794490




















Reviews: