*
Smart Lawn Connect Kit
Installation Instructions
Installation Guide:
1
Using screwdriver, remove (2) two-piece plastic retainer plugs on rearward end of Control Panel
(see illustration below).
A. Insert screwdriver into recess in retainer ring,
underneath plunger, and gently pry upward.
B. Insert screwdriver between metal console and
retainer ring and gently pry upward to remove.
These instructions apply to
Craftsman Pro Series Zero Turn
riding mowers (model #247.XXXXX)
Please read through entire instruction sequence before beginning installation.
Congratulations on purchasing a Craftsman Smart Lawn Connect Kit. The
Craftsman Smart Lawn Connect Plug
will easily plug in to the back side of your Craftsman Rider’s
Ignition Switch
located on the dashboard.
October 26, 2016
Control Panel
WARNING Before performing any maintenance or repairs and to reduce the risk of injury,
disengage PTO, set parking brake, stop engine and remove key to prevent unintended starting.
