background image

2

TABLE OF CONTENTS

Warranty ................................................ 2
Safety Rules .......................................... 2
Product Specifi cations ........................... 4
Assembly/Pre-Operation ....................... 5
Operation............................................... 7
Maintenance Schedule ........................ 11

Manintenance ...................................... 11
Service and Adjustments..................... 14
Storage ................................................ 16
Troubleshooting ................................... 17
Sears Service ........................Back Cover

WARRANTY

SAFETY RULES

LIMITED ONE YEAR WARRANTY ON CRAFTSMAN TILLER
For one (1) year from date of purchase, when this Craftsman Tiller is main tained, 
lu bri cat ed, and tuned up according to the operating and maintenance instructions in the 
own er’s manual, Sears will repair free of charge any defect in material or work man ship.

This Warranty does not cover:
•   Expendable items which become worn during normal use, such as tines, spark plugs, 

air cleaners and belts.

•   Repairs necessary because of operator abuse or negligence, including bent crank-

 shafts and the failure to maintain the equipment according to the instructions con-
 tained in the owner’s manual.

•   If this Craftsman Tiller is used for commercial or rental purposes, this War ran ty ap-

 plies for only thirty (30) days from the date of purchase. 

Warranty service is available by returning the craftsman power mower to the nearest 
sears service center/department in the united states. This warranty applies only while 
this product is in use in the united states.

This Warranty gives you specifi c legal rights, and you may also have other rights which 
vary from state to state.

SEARS, ROEBUCK AND CO., D/817WA, HOFFMAN ESTATES, IL  60179  U.S.A.

IMPORTANT: 

This cutting machine is ca pa ble of amputating hands and feet and throw-

ing objects. Failure to observe the fol low ing safety instructions could result in serious 
injury or death.

TRAINING

•   Read the Owner’s Manual care ful ly. Be 

thor ough ly fa mil iar with the controls and 
the proper use of the equip ment. Know 
how to stop the unit and dis en gage the 
controls quickly.

•  Never allow children to operate the 

equip ment. Never allow adults to op-
er ate the equip ment without proper 
in struc tion.

•  Keep the area of operation clear of all 

persons, par tic u lar ly small children, and 
pets.

PREPARATION

•   Thoroughly inspect the area where the 

equipment is to be used and remove all 
for eign objects.

•  Disengage all clutches and shift into 

neu tral before starting the engine (mo-
tor).

•   Do not operate the equipment with out 

wearing ad e quate outer gar ments. Wear 
foot wear that will im prove footing on 
slippery surfaces.

•  Handle fuel with care; it is highly fl am-

 ma ble. 

•   Use an approved fuel container. 
•   Never add fuel to a running engine or 

hot engine. 

•   Fill fuel tank outdoors with extreme care. 

Never fi ll fuel tank indoors.

•   Replace gasoline cap securely and 

clean up spilled fuel before restarting.

Summary of Contents for Craftsman 917.29149





















Reviews: