3
English
READ ALL INSTRUCTIONS
ASSEMBLY
Before assembling stool, make sure all parts are
present. Compare parts with contents list.
If any
part is missing or damaged, do not attempt to
assemble, install, or operate the product.
Contact customer service for replacement parts.
Frame Installation (Fig. B)
1. Cross the upper leg
3
over top of the lower leg
4
to
make an “X” shape at the top of the leg assembly.
2. Connect the footrest
2
to the leg assembly with
four (4) M6 x 45 mm screws
6
and four (4) M6 locking
nuts
7
and tighten.
3
6
7
4
2
Fig. B
Workshop Table and Stool Set
CMXZSAJ94793
IMPORTANT SAFETY INFORMATION
WARNING:
TO REDUCE THE RISK OF
INJURY, USER MUST READ THIS INSTRUCTION
MANUAL BEFORE OPERATING PRODUCT.
a )
Read, study, understand
and follow all instructions
before assembling or operating this device.
b )
Do not
stand on the stool.
c ) Weight capacity and other product capabilities
apply to properly and completely assembled
product only.
d ) The warnings, cautions, and instructions in this
manual cannot cover all possible conditions or
situations that could occur. Exercise common sense
and caution when using this stool. Always be aware of
the environment and ensure that the stool is used in a
safe and responsible manner.
e )
Do not modify this stool in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the product.
There are specific applications for which the product
was designed.
f )
Use the right tool for the job. DO NOT
attempt
to force small equipment to do the work of larger
industrial equipment. There are certain applications
for which this equipment was designed. It will be safer
and do a better job at the capacity for which it was
intended.
DO NOT
use this equipment for a purpose
for which it was not intended.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE
STOOL SPECIFICATIONS
Width 16.5"
(419.1 mm)
Height 28.4"
(721.4 mm)
Depth 16.5"
(419.1 mm)
Weight Each
10 lbs.
(4.5 kg)
Seat Capacity
300 lbs. (136.1 kg
