background image

1

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk 
of personal injury or property damage.

 

DANGER:

 Indicates an imminently hazardous situation which, if not avoided, 

will 

result in 

death or serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation which, if not avoided, 

could

 result in 

death or serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

minor or moderate injury

.

 

(Used without word) Indicates a safety related message.

NOTICE:

 Indicates a practice 

not related to personal injury

 which, if not avoided, 

may

 result in 

property damage

.

English (original instructions)

LangRef_U_NA_U_U-ENG

 

WARNING: GENERAL SAFETY

 

•  Do not immerse device in water. This can cause electrical shock and damage the product.
•  Do not disassemble device or tamper with internal components. Damage caused by disassembly is not covered  

by the warranty. No user-serviceable parts are inside these devices.

•  Avoid dropping device; this may damage internal components.
•  Keep all parts and batteries out of the reach of children.
•  Use care when mounting the Wireless Outdoor Sensor out of arm's reach. When using a ladder to mount, it must  

be secure to avoid falls that may result in personal injury or property damage.

•  Do not mount Wireless Outdoor Sensor near overhead power lines or other unsafe hanging areas. 

 

 

WARNING: BATTERY SAFETY AND DISPOSAL BATTERY SAFETY

 

 

Read all safety warnings and all instructions before operating devices.   

Compare the illustrations with the devices to familiarize yourself with the supplied components and setup instructions.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

 

WARNING: MAINTENANCE AND CARE

 

 

•  Clean devices with a soft, damp cloth. Do not use caustic cleaners or abrasives.
•  Keep Indoor Display away from dust, dirt, and moisture. Clean ventilation ports regularly with a gentle puff of air.
•  Replace device batteries when low battery icon is shown. Follow all battery recommendations, disposal, and safety 

information detailed in this guide.

•  Wireless Outdoor Sensor is water-resistant and designed for general outdoor use. To extend its life, place in an area 

protected from direct weather elements, including rain, snow, and frost.

BATTERY SAFETY

Clean the battery contacts and also those of the device prior 
to battery installation. Remove batteries from device which 
is not to be used for an extended period of time. Replace all 
batteries of a set at the same time. Only batteries of the same 
or equivalent type as recommended are to be used. Ensure 
the batteries are installed with correct polarity (+ and -). 
Promptly remove dead or expired batteries. 

 

 

CAUTION:

 DO NOT mix old and new batteries or 

batteries of different types. DO NOT use rechargeable 
batteries. DO NOT recharge non-rechargeable 
batteries. DO NOT short-circuit the supply terminals.

BATTERY DISPOSAL

Dispose of old or defective batteries in an environmentally 
safe way and in accordance with your local laws  
and regulations. 

 

WARNING:

 DO NOT incinerate used batteries.  

DO NOT dispose of batteries in fire, because they 
could explode or leak. 

Summary of Contents for CMXWDCR01137








Reviews: