9
Insert Hose (Fig. H)
Insert the Hose Assembly into the Powerhead Assembly
Inlet Port (Located Near the Power Switch). The Hose
should be secure into place.
To remove the Hose Assembly from the Powerhead
Assembly: Twist and pull out on the Hose Assembly to
release the Hose from the Powerhead Assembly Inlet Port.
Hose
Powerhead Assembly
ON/OFF Switch
Powerhead
Assembly
Inlet Port
Fig. H
Hose Assembly Storage (Fig. J)
The Hose Assembly may also be stored inside the Vac
Bucket.
CAUTION:
Do not operate vacuum while the hose or accessories
are stored inside the wet/dry vac’s bucket.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings blocked;
keep free of dust, lint, hair or anything that may reduce
air flow.
Power Cord Storage (Fig. I)
The Power Cord should be wrapped around the Powerhead
Assembly.
Snap the Cord Clip onto the Power Cord, to secure in place.
Cord Clip
Power
Cord
Powerhead
Assembly
Fig. I
Hose
Assembly
(Stored
Inside
Bucket)
Fig. J
!
!
SP7084-1 CMXEVBE176780.indb 9
8/3/19 7:22 AM
