background image

3

English

the chart at the end of this manual for compatibility of 
batteries and chargers.

•  Charge the battery packs only in CRAFTSMAN chargers.
• 

DO NOT

 splash or immerse in water or other liquids.

• 

Do not store or use the tool and battery pack in 
locations where the temperature may reach or 
exceed 104 °F (40 °C) (such as outside sheds or metal 
buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 
materials are created when lithium-ion battery packs 
are burned.

• 

If battery contents come into contact with the skin, 
immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of 
a mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

 

WARNING: 

Burn hazard. Battery liquid may be 

flammable if exposed to spark or flame.

 

WARNING:

 Fire hazard. Never attempt to open the 

battery pack for any reason. If the battery pack case 
is cracked or damaged, do not insert into the charger. 
Do not crush, drop or damage the battery pack. Do 
not use a battery pack or charger that has received a 
sharp blow, been dropped, run over or damaged in 
any way (e.g., pierced with a nail, hit with a hammer, 
stepped on). Damaged battery packs should be 
returned to the service center for recycling.

Storage Recommendations

1.  The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the 
charger for optimal results.

nOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be 
recharged before use.

The RBRC® Seal

The RBRC® (Rechargeable Battery Recycling 
Corporation) Seal on the nickel cadmium, 
nickel metal hydride or lithium-ion batteries 
(or battery packs) indicates that the costs 
to recycle these batteries (or battery 
packs) at the end of their useful life have already been 
paid by CRAFTSMAN. In some areas, it is illegal to place 
spent nickel cadmium, nickel metal hydride or lithium-ion 
batteries in the trash or municipal solid waste stream and 

the Call 2 Recycle® program provides an environmentally 
conscious alternative.
Call 2 Recycle, Inc., in cooperation with CRAFTSMAN and 
other battery users, has established the program in the 
United States and Canada to facilitate the collection of 
spent nickel cadmium, nickel metal hydride or lithium-ion 
batteries. Help protect our environment and conserve 
natural resources by returning the spent nickel cadmium, 
nickel metal hydride or lithium-ion batteries to an 
authorized  service center or to your local retailer for 
recycling. You may also contact your local recycling center 
for information on where to drop off the spent battery. 
RBRC® is a registered trademark of Call 2 Recycle, Inc

.

.

Transportation

 

WARNING: Fire hazard. Do not store or carry the

 

battery pack so that metal objects can contact 
exposed battery terminals.

 For example, do 

not place the battery pack in aprons, pockets, tool 
boxes, product kit boxes, drawers, etc., with loose 
nails, screws, keys, etc. 

Transporting batteries 

can possibly cause fires if the battery terminals 
inadvertently come in contact with conductive 
materials such as keys, coins, hand tools and the 
like. 

The US Department of Transportation Hazardous 

Material Regulations (HMR) actually prohibit 
transporting batteries in commerce or on airplanes in 
carry-on baggage UNLESS they are properly protected 
from short circuits. So when transporting individual 
battery packs, make sure that the battery terminals 
are protected and well insulated from materials that 
could contact them and cause a short circuit.

Important Safety Instructions for All 
Battery Chargers

 

WARNING: Read all safety warnings, 
instructions, and cautionary markings for the 
battery pack, charger and product. Failure to 
follow the warnings and instructions may result 
in electric shock, fire and/or serious injury.

• 

DO NOT attempt to charge the battery pack with 
any chargers other than a CRAFTSMAN charger.

 

CRAFTSMAN

 

 charger and battery pack are specifically 

designed to work together.

• 

These chargers are not intended for any uses other 
than charging CRAFTSMAN rechargeable batteries. 

Any other uses may result in risk of fire, electric shock 
or electrocution.

• 

Do not expose the charger to rain or snow.

• 

Pull by the plug rather than the cord when 
disconnecting the charger.

 This will reduce the risk of 

damage to the electric plug and cord.

• 

Make sure that the cord is located so that it will not 
be stepped on, tripped over or otherwise subjected 
to damage or stress.

• 

Do not use an extension cord unless it is absolutely 
necessary.

 Use of improper extension cord could result in 

risk of fire, electric shock or electrocution.

Summary of Contents for CMCL020





























Reviews: