Craftsman C950-60106-0 Setup Manual Download Page 1

Not 

for  

Reproduction

Setup Guide

Attention Setup Personnel:

be followed when assembling, setting-up, operating, 

servicing, transporting, or storing the unit.
These warnings are highlighted by the safety alert 

triangle symbol shown above, which signi

fi

 es that an 

important safety message is being provided.

You must read, understand, and follow these 

warnings and instructions, and use safe shop 

and work practices at all times while working on 

or around this unit and all other outdoor power 

equipment. 

The safety warnings provided in this guide and 

in the tractor's operator manual included with 

the unit contain important information that must 

Tools

WARNING

AVOID SERIOUS INJURY OR DEATH:

Read and follow the tractor operator

manual before running engine. 

7104985  Revision: B

ZTS 7000

Zero-Turn with Electric Start

EYE PROTECTION

WORK GLOVES

WRENCHES 

7/16

˝

,1/2

˝

, 9/16

˝

, 3/4

˝

TORQUE WRENCH

TIRE PRESSURE GAUGE

CLOTH (checking oil)

MEASURING TOOL FOR LEVELING 

MOWER (4 inch stiff cardboard)

CUTTING TOOL FOR TIE DOWNS

 lb-ft

( Nm)

English

Français

en

fr

Model Numbers:

C950-60106-0
C950-60106-1

C950-60107-0 
C950-60107-1

Summary of Contents for C950-60106-0













Reviews: