OPERATION
15
The snow blower operating controls and their functions
are as follows:
Speed Select Lever
-- Allows the operator to use one of six
(6) forward and two (2) reverse speeds. To shift, move speed
select lever to desired position.
NOTE: Do not move speed select lever while Traction
Drive Clutch is engaged. This may result in severe
damage to drive system.
Auger Drive Clutch Lever
-- Used to engage and disengage
the auger and impeller. To engage push down, to disengage
release.
Traction Drive Clutch Lever
-- Used to propel snowthrower
forward or reverse. Push down to engage, release to
disengage.
Snow Chute Deflector--
Changes the direction the snow is
blown.
Height Adjust Skid--
Used to adjust ground clearance of
auger housing (see "To Adjust Skid Height" in the
ADJUSTMENT/REPAIR section of this manual).
Toolbox --
Spare shear pins, shear bolt wrenches and
spacers are located in toolbox.
Clean-Out Tool --
Use the clean-out tool to remove snow and
debirs from the discharge chute and the auger housing.
Crank (Not Shown)
- Used to change direction of the
snow discharge. turn handle clockwise to turn chute to
right. Turn handle counterclockwise to turn chute to left.
Not
for
Reproduction
