Craftsman 944.364781 Owner'S Manual Download Page 9

24

CRAFTSMAN

 ROT

ARY LA

WN MOWER - - MODEL NUMBER 

944.364781

12

12

16

23

62

63

24

29

57

35

38

38

38

39

44

28

29

31

41

32

32

57

14

26

13

37

55

22

22

59

59

19

21

58

1

9

10

61

17

15

15

34

34

11

11

85

36

33

33

40

48

49

50

51

28

31

41

27

20

25

22

86

87

18

40

9

TO CONVERT MOWER

Your lawn mower was shipped ready to 

be used as a mulcher.  To convert to bag-

ging or discharging:
REAR BAGGING 

•  Lift handle to vertical position.  The rear 

door will rise to allow easy removal and 

replacement of the grass catcher.  Place 

the grass catcher frame hooks onto the 

grass bag brackets.

•  To convert to mulching or dis charg ing 

operation, remove grass catch er and 

close rear door.

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may 

become “loose”, resulting in decreased 

speed.  There is a turnbuckle on the drive 

control housing to increase tension on the 

drive cable.  Pro ceed as follows:

1.  Turn unit off and disconnect spark 

plug wire from spark plug.

2.  Rotate turnbuckle on drive control to 

increase drive speed.

3.  Operate mower to test drive speed.  

Readjust as required.

4.

 

If condition fails to improve after the 

above steps (forward speed remains 

the same), your drive belt is worn and 

should be re placed.

Adjustment

turnbuckle

TO ADJUST CUTTING HEIGHT 

All four wheels are adjusted by a single 

lever.

•  Pull adjuster lever toward wheel. To 

raise mower, move lever forward to 

desired position. To lower mow er, move 

the lever toward the rear.

LEVER 

BACKWARD 

TO LOWER 

MOWER

LEVER 

FORWARD 

TO RAISE 

MOWER

Height 

adjuster lever

SIDE DISCHARGING

•  Rear door must be closed.

•  Open mulcher door and install dis-

 charge deflector under door as shown.

•  Mower is now ready for side discharg-

ing operation.

•  To convert to mulching or bagging 

operation, dis charge deflector must be 

removed and mulcher door must be 

closed and locked. 

Grass bag 

bracket

Grass 

catcher 

handle

Grass 

catcher 

frame hook

Rear door

Vertical position

Full bag 

indicator 

window

Unlock

latch

Open

mulcher door

Summary of Contents for 944.364781

















Reviews: