Craftsman 944.364150 Owner'S Manual Download Page 9

24

MODEL NUMBER GCV160-LAOS3B

HONDA 4-CYCLE ENGINE

9

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED 

Engine speed was set at the factory for 
optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

 

CAUTION:

  Federal regulations re quire 

an engine control to be installed on this 
lawn mower in order to minimize the risk 
of blade contact injury. Do not un der 
any circumstances attempt to de feat the 
func tion of the operator con trol. The blade 
turns when the engine is running.
•  Your lawn mower is equipped with an 

operator pres ence control bar which 
requires the operator to be positioned 
behind the lawn mower handle to start 
and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels 
for high cut, adjust cutting height to suit 
your requirements. Me di um position is 
best for most lawns.
•  To change cutting height, squeeze ad-

juster lever to ward wheel. Move wheel 
up or down to suit your re quire ments. 
Be sure all wheels are in the same set-
ting.

NOTE: 

Adjuster is properly positioned 

when plate tab inserts into hole in lever. 
Also, 

9

-position adjusters (if so equipped) 

allow lever to be positioned between the 
plate tabs.

Pivot pins

Grass 

catcher 

handle

Catcher frame hook

Rear 
door

SIDE DISCHARGING
•  Rear door must be closed.
•  Open mulcher door and install dis-

 charge defl ector under door as shown.

•  Mower is now ready for discharging 

operation.

•  To convert to mulching or bagging 

operation, dis charge defl ector must be 
removed and mulcher door must be 
closed. 

TO CONVERT MOWER

Your lawn mower was shipped ready to be 
used as a mulcher.  To convert to bagging 
or discharging:

LEVER BACKWARD 
TO LOWER MOWER

LEVER FORWARD TO RAISE MOWER

Plate tab

Lever

Open mulcher door

Discharge defl ector

The operation of any lawn mower can result in foreign objects 
thrown into the eyes, which can result in severe eye damage.  
Always wear safety glasses or eye shields while operating your 
lawn mower or performing any adjustments or repairs.  We recom-

mend standard safety glasses or a wide vision safety mask over spectacles.

Use ear 
p r o t e c -
t o r s   t o 
a v o i d 

damage to hearing.

REAR BAGGING 
•  Lift rear door of the lawn mower and 

place the grass catcher frame hooks 
onto the door pivot pins.

•  To convert to mulching or dis charg ing 

operation, remove grass catch er and 
close rear door.

Summary of Contents for 944.364150

















Reviews: