background image

10

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this trimmer does not cover 
items that have been subjected to operator 
abuse or negligence.  To receive full value 
from the warranty, operator must maintain 
trimmer as instructed in this manual.
Some adjustments will need to be made 
periodically to properly maintain your unit.
At least once a season, check to see if 
you should make any of the adjustments 
described in the Service and Ad just ments 
section of this manual.
•  At least once a year, replace the spark 

plug and replace air fi lter element.  A 
new spark plug and clean/new air fi lter 
element assure proper air-fuel mix ture 
and help your engine run better and 
last longer.

•  Follow the maintenance schedule in 

this manual.

BEFORE EACH USE

1.  Check engine oil level.
2.  Check for loose fasteners.
3.  Clean under engine cover.

LUBRICATION

To prolong the useful life of your trimmer, 
change engine oil as recommended in this 
section of this Owner’s Manual.

IMPORTANT:  

Do not oil or grease plastic 

wheel bearings. Vis cous lu bri cants will 
at tract dust and dirt that will short en the 
life of the self- lu bri cat ing bearings. If you 
feel they must be lu bri cat ed, use only a dry, 
pow dered graph ite type lu bri cant spar ing ly. 

PRODUCT SPECIFICATIONS

Serial No.

  

__________________________

Date of Purchase:

  ____________________ 

Gasoline Type:

 Unleaded 

Regular

Gasoline Capacity:

 1,8 

Liters

Oil Type:

 

SAE 30 (Above 32º F)

(API-SF-SJ) 

SAE 5W-30 (Below 32º F)

Oil Capacity:

 0,51 

Liters

 

Spark Plug:

 Champion 

RJ2YLE 

 

(Gap: 0,50 mm)

  

 

Trimmer Line Diameter:

  

0,155 inch

Trimmer Line Length: 

 18,75 

inches

The model and serial numbers will be found 
on a decal attached to the rear of the trim-
mer. Record both serial number and date of 
purchase in the space provided above.

19

NOTE:

  All component dimensions given in U.S. inches.  1 inch = 25.4 mm.

IMPORTANT:

 Use only Original Equipment Manufacturer (O.E.M.) replacement parts.

Failure to do so could be hazardous, damage your weed trimmer and void your warranty.

 KEY     PART 

 

 NO.      NO. 

  DESCRIPTION

    1     - - - 

  Engine, Briggs & Stratton, Model No.

   

 

126M02-0003-F1 

(See 

Breakdown)

  2 

150406 

  Bolt, Engine Mounting  3/8-16

 3  179466 

 Pulley, 

Engine

 4  88348 

 Washer, 

Flat

 8  169821X479  Handle, 

Lower

  9 

428867 

  Screw, Hex Washer Head  5/16-18 x 3/4

 10 

177815 

  Handle, Upper

 11 

170980 

  Bolt, Handle

 12 

189713X428    Knob, Handle

 15 

179751 

  Handle Adjuster Assembly

 16 

581902101    Guide, Rope

 18 

66426 

  Wire Tire

 19 

585645301    Control Bar

 20 

417238 

  Throttle Control

 21 

158755 

  Screw, Hex Washer Head

 22 

447829 

  Axle Shaft

 23 

428867 

  Screw, Hex Washer Head  5/16-18 x 3/4

 24 

169823 

  Spacer

 25 

197480 

  O-Ring

 26 

431880X460    Wheel, 12" x 1-3/4

 27 

409149 

  Locknut, Hex  3/8-16

 28 

584954101    Drive Control Cable

 30 

584990601    Decal, Warning

 31 

172221X004    Support Bracket, Axle Shaft

 32 

164265 

  Grip, Handle

 33 

132004 

  Nut, Hex

 34 

581912601    T-Knob

 36 

851084 

  Bolt, Hex Head

 37 

850263 

  Washer, Lock

 38 

851074 

  Washer, Flat, Hardened

 41 

445315X479    Cover, Axle

  - - 

586250527    Owner's Manual, English

  - - 

586250531    Owner's Manual, French

CRAFTSMAN 

WEED TRIMMER - - MODEL NUMBER  

944.361163

Summary of Contents for 944.361163















Reviews: