10- ENG
D30339
PRESSURE WASHER
High Pressure Pump (located
inside the shroud)
: Increases the
pressure of the water supply.
Engine:
Drives the high pressure
pump.
High Pressure Hose:
Carries the
pressurized water from the pump to
the gun and spray wand.
Spray Gun:
Connects with spray
wand to control water flow rate,
direction, and pressure.
Multi-Adjustable Spray Wand:
Has a
spray nozzle which adjusts from a
pencil stream (0°) to a wide angle fan
spray (40°). The spray can be
adjusted by twisting the nozzle
clockwise and/or counterclockwise.
ENGINE
Choke Control:
Opens and closes
the choke valve in carburetor.
Throttle Control Lever:
Controls
engine speed.
Starter Grip:
Pulling starter grip
operates recoil starter to crank
engine.
Also, the high and low pressure
settings can be controlled by moving
the nozzle in and out. See Operation
section. See How To Use Wand
paragraph in this section.
Chemical Hose:
Feeds cleaning
agents into the pump to mix with the
pressurized water. See How To Apply
Chemicals/Cleaning Solvents in
Operation section of this manual.
OPERATION
Know Your Pressure Washer
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
High
Pressure
Pump
Engine
High
Pressure
Hose
Spray
Gun
Multi-Reg
Wand
Chemical
Hose
Hand
Grip
Air Filter
Choke
Control
Throttle Control
Oil
Fill
