15
TEMPERATURE MEASUREMENTS
1. Set the function switch to the
TEMP
position.
2. Insert the Temperature Probe into the
negative
COM
and the
V·
·CAP·TEMP·Hz·
positive jacks, observing polarity.
3. Touch the Temperature Probe head to the
device under test. Continue to touch the part
under test with the probe until the reading
stabilizes.
4. Read the temperature on the
display. The
digital reading will indicate the proper
decimal point and value.
5. Use
the
MODE
button to select
o
F or
o
C.
WARNING:
To avoid electric shock, be sure the
thermocouple probe has been removed
before changing to
another measurement function.
CONTINUITY CHECK
WARNING:
To avoid electric shock, never measure continuity
on circuits or wires that have voltage on them.
1. Insert the black test lead into the negative
COM
terminal and
the red test lead into the
V·
·CAP·TEMP·Hz·
positive terminal.
2. Set the function switch to the
•
)
)
)
position.
3. Use
the
MODE
button to select continuity “
•
)
)
)”
. The display
icons will change when the
MODE
button is pressed.
4. Touch the test probe tips across the circuit or component
under test.
5. If the resistance is < 40
, a tone will sound.
