background image

TABLE OF CONTENTS

Warranty 

.....P. 2

Save these instructions 

.....P. 2

Safety instructions 

.....P. 3

Assembly 

.....P. 3

Operation 

.....P. 4

Maintenance 

.....P. 5

Parts 

.....P. 6

Troubleshooting 

.....P. 6

Service 

.....P. 7

WARRANTY

CRAFTSMAN PROFESSIONAL WARRANTY

If this Craftsman Professional product fails due to a defect in material or workmanship within 

one year from the date of purchase, return it to any Sears store or other Craftsman Professional 

outlet in the United States for free replacement.

This warranty gives you specific legal rights, and you may also have other rights which vary 

from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS

For your safety, read, understand, and follow the information provided with and on this jack.

•  The owner and operator of this equipment shall have an understanding of this jack and safe 

operating procedures before attempting to use. The owner and operator shall be aware that 

use and repair of this product may require special skills and knowledge. Jack instructions 

and safety information must be conveyed in jack operator’s native language before jack is 

used. If any doubt exists as to the safe and proper use of this jack, remove from service 

immediately. 

•  Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including 

labels) are noted. Any jack that appears damaged in any way, operates abnormally or is 

missing parts, shall be removed from service immediately. 

•  If the jack has been or suspected to have been subjected to a shock load (a load dropped 

suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked 

by a Sears or other qualified service center. It is recommended that an annual inspection 

be done by qualified personnel. 

•  Labels and Owner’s Manuals are available from Sears (see PARTS section on page 6).

2

Summary of Contents for 50244








Reviews: