Craftsman 50145 Speedy Lift Operator'S Manual Download Page 2

TABLE OF CONTENTS

Warranty

.....P. 2

Save these instructions

.....P. 2

Safety instructions

.....P. 3

Assembly

.....P. 3

Operation

.....P. 4

Maintenance

.....P. 5

Troubleshooting

.....P. 6

Parts

.....P. 6

Service

.....Back cover

WARRANTY

ONE YEAR FULL WARRANTY ON CRAFTSMAN PROFESSIONAL FLOOR JACK

If this Craftsman Professional floor jack fails to give complete satisfaction within one year
from date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS
PARTS & REPAIR CENTER IN THE UNITED STATES, and Sears will repair it, free of
charge.

This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS

For your safety, read, understand, and follow the information provided with and on this jack.
• The owner and operator of this equipment shall have an understanding of this jack and

safe operating procedures before attempting to use. The owner and operator shall be
aware that use and repair of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in the operator’s native language
before use of this jack is authorized. If any doubt exists as to the safe and proper use of
this jack, remove from service immediately.

• Inspect before each use. Do not use if broken, bent, cracked, or damaged parts

(including labels) are noted. Any jack that appears damaged in any way, operates
abnormally or is missing parts, shall be removed from service immediately.

• If the jack has been or suspected to have been subjected to a shock load (a load

dropped suddenly, unexpectedly upon it), immediately discontinue use until jack has
been checked by a Sears or other qualified service center. It is recommended that an
annual inspection be done by qualified personnel.

• Labels and Owner’s Manuals are available from Sears (see PARTS section on page 6).

2

Summary of Contents for 50145 Speedy Lift








Reviews: