background image

2

TABLE OF CONTENTS

WARRANTY

SAFETY RULES ..............................................................2
FULL SIZE HARDWARE CHART ....................................3
CARTON CONTENTS .....................................................4
ASSEMBLY ......................................................................4
OPERATION ............................................................... 9-10

MAINTENANCE/STORAGE ............................................ 9
SERVICE/ADJUSTMENTS ........................................... 10
REPAIR  PARTS  ........................................................... 11
PARTS ORDERING/SERVICE ........................Back Cover

Look for this symbol to point out important safety precautions. It means — 

Attention!! Become 

alert!! Your safety is involved.

•  When de-thatching do not drive too close to a creek or 

ditch and be alert for holes and other hazards which 
could cause you to lose control of the vehicle.

•  Before operating vehicle on any grade (hill) refer 

to the safety rules in the vehicle owners manual 
concerning safe operation on slopes. STAY OFF 
STEEP SLOPES.

•  This equipment is not meant for street or highway use.  

Watch for traffic when de-thatching near highways.

•  Vehicle and attachments should be stopped and 

inspected for damage after striking a foreign object.

•  Check all nuts, bolts and screws frequently making 

sure they are tight and the equipment is in safe 

 

working condition.

•  Follow the maintenance instructions as outlined in this 

owners manual.

•  Read safety rules in the vehicle owners manual and
 

know how to operate your equipment, before using 
the tine dethatcher. 

•  Never operate vehicle and tine dethatcher attachment 

without wearing substantial footwear, and do not allow 
anyone to ride or sit on the tine dethatcher.

•  Never allow children to operate the tractor or 
 

dethatcher attachment, and do not allow adults to 
operate without proper instructions. 

•  Eye Protection should be worn when operating the 

tine dethatcher.

•  Always begin with transmission in first (low) gear, 

and gradually increase speed as conditions permit.  
Recommended maximum operating speed is 3 M.P.H.

•  Always stop vehicle and lift dethatcher to transport 

position before making short turns.

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. 
Exercise caution at all times, when using power equipment.

SAFETY

MODEL NUMBER: 

 

486.24312

SERIAL NUMBER: 

 

__________________

DATE OF PURCHASE:   

__________________

The model number and serial numbers will be found on a 
decal attached to the dethatcher.

You should record both the serial number and the date of 
purchase and keep in a safe place for future reference.

ONE YEAR FULL WARRANTY

When operated and maintained according to the instructions supplied with it, if this Dethatcher fails due to a defect in material 
or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or replacement 
if repair proves impossible).

If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179

Summary of Contents for 486.24312













Reviews: