4
ASSEMBLY
• Assemble both of the end plates to the blade using
four 5/16" x 1" carriage bolts and 5/16" nylock nuts.
Center both plates on each end of the blade.
Do not
tighten yet.
See figure 1.
FIGURE 1
CARTON CONTENTS
1. Frame (1)
2. Blade (1)
3. Scarifier (1)
4. Box End Plate (2)
Hardware Package (See page 3)
5. Clevis Bracket (1)
6. Hitch Assembly (1)
7. Pivot Assembly (1)
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS REQUIRED FOR ASSEMBLY
(1) 1/2" Wrench
(2) 9/16" Wrenches
(1) Pliers
FIGURE 2
• Assemble the scarifier through slots in the end plates.
Secure with two 3/8" x 3/4" clevis pins and two 3/32"
hairpin cotters (small). See figure 2.
•
Tighten
the four bolts assembled in figure 1.
• Assemble the pivot reinforcement bracket assembly to
the blade using four 3/8" x 1" carriage bolts and 3/8"
nylock nuts.
Tighten.
See figure 2.
1
4
5
2
3
6
7
5/16" x 1"
CARRIAGE BOLT
5/16" NYLOCK NUT
END PLATE
3/32" HAIRPIN
COTTER
3/8" x 3/4"
CLEVIS PIN
SCARIFIER
3/8" x 1"
CARRIAGE BOLT
3/8" NYLOCK NUT
PIVOT REINFORCEMENT
BRACKET ASSEMBLY
