Craftsman 315.ID2025, Operator'S Manual

Page: 3 / 20

3 - English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY


Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.

Keep children and bystanders away while operat-
ing a power tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Un-
modified plugs and matching outlets will reduce risk of
electric shock.

Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators.
There is an increased risk of electric shock if
your body is earthed or grounded.

Do not expose power tools to rain or wet condi-
tions.
Water entering a power tool will increase the risk
of electric shock.

Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk
of electric shock.

When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of electric
shock.

If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.

Use battery only with charger listed. For use with
19.2V nickel-cadmium and 19.2V lithium-ion battery
packs,
see tool/appliance/battery pack/charger cor-
relation supplement 988000-272.
PERSONAL SAFETY

Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.

Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.

Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.

Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.

Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power
tool in unexpected situations.

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.

If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.

Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.

Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.

Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.